Sale!
jym-classic-06

Vortex JYM HS Hair Dryer

The unique futuristic design Energy Efficient & Hygienic High-speed JYM Hair Dryer with auto sensing and a rotating or fixed nozzle will make hair drying easy regardless of its length ideal for Gyms, Arenas, Sports Club, and retro fitting.
Category:
  • Description
  • Short specs
  • Installation template
  • Warranty

• EXCLUSIVE 10 YEAR LIMITED WARRANTY
• Outstanding inside out coverage
• Exclusive Diamond prolonged warranty

• INCOMPARABLE TECHNOLOGY
• Unique STERI-DRY germicidal bulb, eliminates 99.9% of bacteria & viruses
• Wi-Fi compatible
• Streamlined high efficiency low wattage motor
• 60 second hair dry cycle
• Unique ceramic energy-conservation element

• UNSURPASSED QUALITY
• Built and produced in North America
• Meticulous, one-of-a-kind quality control procedures
• Built to last and function even in the most challenging locations
• Complete die cast aluminum cover and wall plate
• High quality cast zinc 360⁰ directional or lock nozzle

• STATE OF THE ART DESIGN
• Easily harmonized with any design washroom
• Classy, easy to clean surface
• Ideal for retrofitting existing, conventional high energy consuming hand dryers

• MATCHLESS CUSTOMER SERVICE
• Stand-by customer service attendants on line 24/7

• UNEQUALLED DRYER ELEMENT
• Our specially developed ceramic element eliminates all possible loss of heat with the tight-fit orifice element compartment

• SUPREME DESIGNER COLOR PALETTE
• Up-to-date in-stock designer color dryers with unequalised color options

ShortSpec Classic REV01.cdr

1.1.1.1 Mounting: surface-mounted.

1.1.1.2 Electrical Rating: (JYM HS) 1050 watts, 10 Amps, (110 – 120VAC, 50/60 Hz).

1.1.1.3 Electrical Rating: (JYM HS) 1050 watts, 5.2 Amps, (208-240VAC, 50/60 Hz).

1.1.1.4 Wi-Fi integrated technology can be monitored at distance for defaults such as motor and heater element failures.

1.1.1.5 Nozzle Type: single port multi directional for diffused, comfort dry.

1.1.1.6 Intake Air Filter: coarse foam type air filter to capture lint and debris from air. 1.1.1.7 Air Flow: 70 CFM at 246 mph (21648LFM).

1.1.1.8 STERI-DRYTM germicidal technology UVC bulb.

1.1.1.9 Motor: through-flow discharge vacuum type with automatic reset 1.5 HP, 32,000 RPM.

1.1.1.10 Electronic Controls: automatic optical sensor. Operates while hair is under blower. Auto shut off after each 60 second cycle. Hair must be placed under dryer to start dryer.

1.1.1.11 Heater: nichrome wire element mounted inside ceramic housing with dual level safety protection – automatic resetting thermostat to open when air flow is restricted and close when air flow is resumed with back-up one use thermal cutoff. Heated air temperature is 111 degrees F (44 degrees C) at an ambient of 70 degrees F (21 degrees C).

1.1.1.12 Warranty: 10-year manufacturer limited warranty (not including replaceable filters or germicidal bulb).

1.1.1.13 Sound Level: 78 dBA at operator with hair under unit; 68 dBA at 39.5 inches (1 meter), without head under unit.

1.1.1.14 Anti-microbial features inhibit the growth of bacteria, mold and fungus, extending the dryer’s service life.

1.1.1.15 Cover Material: one piece, heavy duty, die-cast aluminum. 1.1.1.16 Weight & dimensions, weight 5.101kg (11 ¼ lbs) width 274.32mm (10.81”) x height 236.60mm (9.315”) x depth 253.22mm (9.97”)

ShortSpec Classic REV01.cdr

 

MODEL COLOR VOLTAGE SKU
VCLJ1BLK BLACK 110-120VAC 769498991534
VCLJ2BLK BLACK 208-240VAC 769498991596
VCLJ1WHT WHITE 110-120VAC 769498991589
VCLJ2WHT WHITE 208-240VAC 769498991640
VCLJ1CHA CHARCOAL 110-120VAC 769498991541
VCLJ2CHA CHARCOAL 208-240VAC 769498991602
VCLJ1CHR CHROME 110-120VAC 769498991558
VCLJ2CHR CHROME 208-240VAC 769498991619
VCLJ1RED DARK RED 110-120VAC 769498991572
VCLJ2RED DARK RED 208-240VAC 769498991633
VCLJ1CUS CUSTOM 110-120VAC 769498991565
VCLJ2CUS CUSTOM 208-240VAC 769498991626

ShortSpec Classic REV01.cdr

Recommended mounting heights for the VORTEX JYM HS HAIR DRYER from floor to dryer bottom edge – in (cm)

MEN – 68″ (173cm)

WOMEN – 59″ (150cm)

CHILDREN, AGES 13-17  -59″ (150cm)

CHILDREN, AGES 10-13  – 54″ (137cm)

CHILDREN, AGES 7-10  – 48″ (122cm)

CHILDREN, AGES 4-7  – 41″ (104cm)

Mounting Templates Rev02.cdr

LIMITED WARRANTY & DIAMOND WARRANTY

10 YEAR LIMITED WARRANTY

We at VORTEX DRYERS take the greatest care and pride in manufacturing outstanding hair and hand dryers (THAT) meet the needs of the most demanding. To insure our customers of their entire satisfaction we have taken the following initiative in putting together the best warranty and return policy that exists to our knowledge.

1. A Warranty Policy Statement along with installation template and instructions (ARE) packed with each dryer manufactured by VORTEX DRYERS. 2. All VORTEX DRYERSUNITS MUST BE REGISTERED TO ACTIVATE WARRANTY.

In essence, VORTEX DRYERS warrants the consumer that it's products are free of defects in either material or workmanship. If, during the 10-year warranty period following a purchase by the end user, if a consumer finds that a Vortex supplied dryer is defective, Warranty shall include labor performed at factory as well as the repair or exchange of defective parts, at manufacturer’s option.

3. A Returned Goods Authorization number (R.G.A. #) MUST first be obtained from VORTEX DRYERS, for defective goods or components being returned This R.G.A. system allows us to properly track and document each return and assure that the necessary follow-up is done. Returned Goods which do not have an authorized R.G.A. number will not be accepted by VORTEX DRYERS.

4. Warranty covers all mechanical or electronic defects. It does not cover wear and tear. It does not cover misuse or abuse. It does not cover air filter or Germicidal bulb. It does not cover transportation or freight costs or any on site labor charges associated with repair. Our warranty policy, if properly explained by the distributor, will provide the purchaser with the deserved protection without the problems of misunderstanding.

5. Warranty requires that the purchaser with a defective dryer or component return it, prepaid, to VORTEX INDUSTRIES INC. or one of its authorized distributors. If, upon examination, the product is found to be defective within the warranty period, the faulty parts will be repaired or replaced without cost.

Your Vortex Dryer doesn’t seem to be working properly. What should you do? First check the Troubleshooting Guide in your owner’s guide. Some troubleshooting suggestions are included here. If you still need help, call us at 1-844- 9VORTEX or write us: service@vortexdryers.com

OPTIONAL VORTEX INDUSTRIES INC.EXCLUSIVE DIAMOND WARRANTY

What is the VORTEX DRYERS DIAMOND WARRANTY? The Diamond Warranty is optional and covers the complete unit against technical defaults as well as vandalism for a period of 10 years.

What is the cost of the Diamond Warranty? The one-time fee is $74.80 plus local taxes. This can be paid on-line by credit card when registering your Vortex Dryer.

How does it work? From the original date of purchase of the dryer by the end user and for a period of 1 year VORTEX DRYERS will replace the defective or vandalized dryer with a new replacement unit.

(Scratches, graffiti or intentional damages are not considered as vandalized units). Should your Vortex Dryer become defective or vandalized for years 2, 3 and 4 you will have the possibility of receiving a new unit for 30% of your initial cost (original invoice will be requested). As of the remaining 10-year warranty we will replace your defective or vandalized unit for 50% of your initial cost (original invoice will be requested). The Diamond Warranty covers replacement parts except for the coarse air filter and the germicidal bulb as well as on site labor costs or shipping and handling.

· Can I send my defective or vandalized dryer directly to Vortex Dryers or any authorized VORTEX Dealer? Yes, but first you need to call us to obtain a Return Goods Authorization (RGA) number. This number helps us quickly track the status of your product. In North America, call 1-844- 9VORTEX. Vortex Dryers customer service representatives are available to assist you Monday through Friday, 8:30 AM to 8 PM ET and Saturdays from 9 AM to 5 PM ET. A copy of this RGA must be attached and visible with the returned dryer.

Please have the following information ready when contacting us:

· Product model and series number, which is next to the air output on bottom of dryer

· Date of purchase

· Where Dryer was purchased

· Details of the problem you are experiencing

If your product has been registered and is covered by our EXCLUSIVE DIAMOND WARRANTY and you plan to send it to Vortex Enterprises for replacement, please have your credit card number available to cover shipping and replacement costs.

WARRANTY REGISTRATION CARD

Please fill out to register your dryer warranty.

Company name: _______________________________________

Contact Information: _______________________________________

Address: _______________________________________

City: _______________________________________

Province/State: _______________________________________

Country: _______________________________________

Phone: _______________________________________

E-Mail _______________________________________

Fax: _______________________________________

Model: _______________________________________

Serial #: _______________________________________

Date of purchase: _______________________________________

Name of Distributor where unit was bought: ______________________________

Once the above information has been filled out please send by E-Mail: vortex.warranty@vortexdryers.com or Fax: 514-312- 1209.

A confirmation # will be forwarded to you once we have registered your dryer, please allow 7-10 days’ lead time.

(Scratches, graffiti or intentional damages are not considered as vandalized units). Should your Vortex Dryer become defective or vandalized for years 2, 3 and 4 you will have the possibility of receiving a new unit for 30% of your initial cost (original invoice will be requested). As of the remaining 10-year warranty we will replace your defective or vandalized unit for 50% of your initial cost (original invoice will be requested). The Diamond Warranty covers replacement parts except for the coarse air filter and the germicidal bulb as well as on site labor costs or shipping and handling.